Party Light & Sound PARTY-12RGB Manual De Uso página 6

⠗ Extend the antenna on the rear panel of the unit to its full length in a vertical position.
⠗
Start singing into the microphone and adjust the volume to the desired level.
⠗ The antenna must not touch any metal object.
⠗ When the indicator lamp on the mic lights up, you have to replace the battery.
⠗
Don't use the microphone close to the speaker in order to avoid feedback.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/TF/FM/Bluetooth, connect a microphone
and sing along.
Built-in REC function
1. Plug a microphone into the MIC IN input.
2. Insert a USB/TF card into the corresponding port. Press Input selector button and select USB/TF mode.
3. If the USB/TF card is plugged into the speaker for the first time, the system will automatically create a folder
named 'record' to save the recorded files.
4. When you are ready to record, press REC button to record the sound of the wireless or wired microphone.
USB/TF Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/TF card and re-plug it. The
speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
Supported music formats: MP3, WMA
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display will
show the frequency).
2. Press the PLAY/PAUSE button on the unit or the key  on remote control to activate the auto memory (the
radio starts an automatic search for available radio stations and saves them automatically). The station's
number stored depends on the radio signal in your area. During the search, press PLAY button on the remote
control to stop searching.
3. Use the  and  keys to listen to the various radio stations saved in memory.
4. To change to a preset station, use the number keys on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as «PARTY».
4. Press the  to start playing and the buttons  and  for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
on
No sound from the mi-
crophone
No sound after inserting
USB/TF card
6
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/TF card
Solution
1. Connect an AUX signal
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/TF card properly
EN