Publicidad
Idiomas disponibles
Idiomas disponibles
E
N
G
L
|
S
H
18
Clock Basics
(The clock system is 12-hours.)
Initial Time Setting
(B) Press and hold © for more than 2 seconds.
"AdJ" is displayed.
Press and hold ©
again for more than 2
N
Z
seconds. "12" blinks indicating the time set-
=
ent
ting mode is activated.
© To set hours, press ">" or "<".
Ñ
7
|
itr
© Press again g) for minute setting.
© To set minutes, press ">" or "<<",
Hold ">" or "<<" to change numbers rapidly.
© When you have set the time, press g)
Resetting the Time
When you want to reset the time, press and hold © for more than 2
seconds to activate the time setting mode. Then, repeat step © to ©.
above.
Selecting the Clock Display
Press and hold © for more than 2 seconds for clock display.
Press @ once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode
|
remains on. When the PWR is pressed again, the system is com-
pletely off.
Note: Before you leave your car that has no ACC, be sure to switch
CQ-R255SEUC
power off.
Publicidad
