Publicidad
Idiomas disponibles
Idiomas disponibles
Instal lation Guide
continued
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
c) Insert the Power Connector © to the unit.
© Power connects
e
us
ON
Unit
PK
ý
(5) Mounting Bolt
d) Insert the unit into Mounting Collar (D and push it in until "click" is heard.
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
E Using the Rear Support Strap @)
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall of Car,
or some other metallic area.
E Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion (Optional), and mount it into the exist-
ing Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
© Tapping Screw
3 mmo
{existing on the car)
@ Hex. Nut
>
(
ENR
À Rubber Cushion
|
(Optional)
N @ Rear Support Strap
6) Mounting Bolt
SET
© Mounting Bolt
(D Mounting Collar
(D Mounting Collar
3. After installation reconnect the negative (-) battery terminal.
26
CQ-R255SEUC
Publicidad
