Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide continuea
@ Remove the removable face plate by pulling on the right side of the unit. Place the removable face plate in
a supplied case.
E
N
G
L
|
S
H
Contacts
Main Unit
Fig. 2
Security indicator
@ As shown in Fig.3, insert the removable face plate
with the arrow pointing toward the removable face
Removable Face Plate Case
plate case until you hear a "click". Keep the
removable face plate in the case. Then, you can
bring the plate safely.
Set two arrows together. ` Fig-3
To install the Removable Face Plate
@ Slide the left side of the removable face plate in place.
.
@ Press the right end of removable face plate until "click" is heard.
Plastic Tab
Removable
' Face Plate
Cutout
Caution:
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removabie face plate on the dashboard or nearby areas where the eet
rises
to high levets.
. Do not touch the contacts on the removable face pee or on the main unit, since this may suit in poor
electrical contacts.
. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
CQ-R255SEUC
28
Publicidad
