Jimmy BX5 Pro Manual Del Usuario página 6

Note:
1.Do Not miss the filter!
2.If too much dust is accumulated in the dust cup, clean
the dust cup and filter assembly with water, and wipe
Take out
them with dry cloth. Pay attention that MIF filter need
to be washed as less as possible. Clean the dust and
Brushroll
foreign matters on MIF filter by tapping, and ensure
that the dust cup and filter assembly are completely dry
Brushroll cover
8 9
before installation.
Brushroll cleaning and installation
Turn off the machine and unplug the power cord, rotate the right lock knob anticlockwise
with hand from locked position to unlock position (Figure 8) to remove the brushroll to clean
up.(Figure 9)
After cleaning the brushroll, install the brushroll and brushroll cover back to mainbody in turn,
and lock the brushroll latch.
Note:for safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.
Maintenance and storage
Please clean dust cup and filter after each use for further use. It is recommended to replace a
filter after 30-50 hours of working time(depending on specific situation) for better use.
Any paper, lead glass, plastic will greatly affect the effect of UV light. Dust or stain on UV light
cover will affect the effect of UV light. Please wipe and clean the UV light cover regularly for
better use.
Do not touch the UV light cover as dirt will affect UV light effect.
Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct
sunlight or humid environment.
Safety Notes
1. Please read this instruction manual carefully before use and keep it properly for future.
2. The product design and spec in the manual may slightly vary from the actual product.Please
take physical product shall prevail.
3.Never leave the machine working without supervision.
4. Please turn off the power switch and unplug the power cord if the machine is to be idled.
Do Not unplug the power cord with humid hand in case of electric shock.
4