PRIXTON SYNERGY MGF80 Manual De Instrucciones página 9

4 replaceable massage nodes
fork
ball flat
cone
Instructions for massage node installation:
Swap massager nodes when the massager is off.
Parameters
Intensity 5
Voltage 12 V
Battery Capacity 2000mAh
Dimension 16.3*22.5*6.3cm
Net Weight 0.9KG
Endurance 8h
Charge
1.Charge the battery for at least 6 hours before first use.
2.Plug the adapter into the massager charging port and then plug into an outlet to
charge.
3.The power indicator will flicker regularly while charging and keep steady on when fully
charged.
4.The battery can be charged at any time and under any power level. Do not use the
massager while charging.
Operation Instructions
1. Move power switch, located at the bottom of the device, to ON position. Press the control
button to turn the massager on. Press it again to cycle through the 5 intensity levels.
2. While finishing using, move power switch to OFF position to turn the massager off.
Maintenance, Cleaning, Storage, Delivery
1.Spot clean only. Unplug and wipe with a damp cloth.
2.Air-dry only. Never place in a dryer.
3.Clean the massager and pack well if not using for a long time and charge every half a
year.
4. This product can be transported by automobiles, trains, ships, and aircrafts.
Massage Node Operation Guidance
BALL ：
Mainly used for large muscle groups
CONE ：
Mainly used for trigger point and deep muscle groups
FLAT ：
Suitable for all body parts
FORK ：
Mainly used for spine, waist and large muscle groups
9