Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTABLE TAPER LEVER
Close Cut
Longer Cut
The taper lever is positioned at
your thumb. You can hold the
clipper in your hand and adjust
the lever at the same time – while
you are clipping.
The taper lever adjusts the
closeness of the cut from a close
cut with the taper lever in the up
position, to a longer length cut
with the taper lever in the down
position. To increase cutting
length, slowly push the lever
down. To cut closer, push the lever
up. As different cutting edges are
used in each setting, using the
taper lever lengthens the life of
the clipper blades.
Too much hair can slow down
hair clippers. Keep the clipper on
for removing hair. Then push the
taper lever back and forth quickly
for several times. If you do this
every time, especially after much
hair cutting, the clipper blades
should remain free of cut hair.
Oil the blades after the above
procedures.
DISPOSAL OF LITHIUM ION
BATTERY
This
clipper
has
a
lithium-
ion
battery.
To
protect
environment,
these
batteries
should be removed and properly
disposed of when the unit is no
longer operating. To remove
the battery block for disposal
or
recovery,
follow
instructions:
1. Disconnect the clipper from
household outlet.
2. Discharge the battery pack
completely before removing.
3. Remove the name plate and
bottom cap.
4. Remove 4 screws and open
cover.
5. Remove the screw that fastens
the printed circuit board to
housing. Lift printed circuit
board out.
6. Unplug lithium-ion battery.
7. To protect the environment, do
not dispose of your battery with
your ordinary household waste.
For more details on recovery of
material and waste-treatment
facilities, please contact the
waste disposal services in your
region.
CONTAINS
LITHIUM
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE MUNICIPAL WASTE.
the
8
these
Adapter
Brosse de
nettoyage
ION
ON/OFF Switch (ON marked
«I», OFF marked «0»)
Taper Control
PRODUCT FEATURES
1. 8 comb attachments
2. 6800 rpm digital motor
3. LED charge indicator light
a. LED BLUE blinking: charging
Lubricating
b i
b. LED BLUE: fully charged
oil
c. LED BLUE flashing: 10 minutes battery
left
9
Publicidad
