NeuLog WIFI-202 Guia Del Usuario página 19

Using the NeuLog WIFI module
The NeuLog WIFI module is a very advanced piece of
equipment; having capability to transmit its own wireless
network as well record data from up to 5 NeuLog
sensors at a time.
The NeuLog WIFI module can be powered by the
NeuLog battery module or by a USB power source.
It also can be used as a USB module when it is
connected to a PC or Mac and under local NeuLog
software.
You'll notice that on the front of the WIFI-202 module
there is a LED indicator that includes four color LEDs.
Underneath the indicator, there is a legend that explains
what each color represents:
 Blue (access point) – When the blue LED is the only
light on, the WIFI module is in Access Point mode
(described below) and is transmitting a closed
wireless network which you can connect devices to.
 Green (client mode) – When the green LED is the only
light on, the WIFI module is in Client Mode (described
below) and allows your wireless devices to control
sensors through the website
as browse the internet.
 Red (transmission) – The red LED will blink when there
is active communication between any connected
sensors and the computer or smart device.
 Orange (USB module) – The orange LED will remain lit
when the WIFI module is working in USB mode
(detailed below). USB mode can be turned on and off
by pressing the button on the front of the WIFI module
three times.
V2018.01
19
www.wifi201.com
Home
as well
English