NeuLog WIFI-202 Guia Del Usuario página 21

21
Home
Important:
In the event that anyone used the WIFI module as the
controller and forgot to disconnect from it, the WIFI
module will not allow any other user to connect to the
WIFI module as a controller until it is restarted.
In order to allow another controller to access the WIFI
module, press and hold the push button located on the
front panel of the WIFI module for 3 seconds until all 3
lights turn on – this will refresh the module resetting it
back to having no users in "Control Mode".
Access point mode use
Access point mode is the default operating mode for the
the NeuLog WIFI module – it transmits its own closed
wireless network which allows up to 5 devices to connect
to it at a time. No prior wireless networks are required,
making this option both very portable and unique.
Because the network is closed; you will not be able to
browse the internet, if you wish to browse the internet
while using the WIFI module please locate the "Client
Mode" procedural guide in this manual. Connect up to 5
NeuLog sensors directly to the left side of the WIFI-202
module (no wires required).
V2018.01 English