Publicidad
Idiomas disponibles
Idiomas disponibles
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
The declared vibration total value may be used for comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as the times when the tool is switched off and when
it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Help to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Spanner
Metal grinding disc
Auxiliary handle
Anti-vibration auxiliary handle
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you and offer advice.
Angle Grinder
Vibration emission value
(for main handle)
Vibration emission value
(for auxiliary handle)
Uncertainty K = 1.5m/s²
C or less
0
WX710
1
/
WX710
WX711 WX711.1 WX712
a
= 4,071m/s
2
h
a
= 4,557m/s
2
h
WX711 WX711.1
1
1
1
/
a
= 5,124m/s
2
h
a
= 9,136m/s
2
h
WX712
/
1
EN
7
Publicidad
