English
Installation
1.
Plug the adapter with the USB Type-A male side into a USB
female port of you power supply or device.
2.
Afterwards you can connect a device to the USB female port of
the adapter.
3.
Thereupon the indicator of the adapter will show the ampere
value and volt value each for one second.
Attention:
The adapter works only in one direction. On the plug (male) side
of the adapter you need to connect the power source e.g. power
supply or laptop.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage:
www.delock.com
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 09/2023
-3-