HAMPTON BAY TITAN 52401 Guía De Uso Y Mantenimiento página 11

Assembly - Attaching the Bottom Plate
1
Attaching the bottom plate
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
□
Place the bottom plate (F) into the motor assembly (E), aligning
the raised dimples on the top flange of the bottom plate (F)
with the flat areas on the switch box on the bottom of motor
assembly (E).
□
Turn the bottom plate (F) clockwise until it stops.
Assembly - Optional - Installing the Light Kit (not included)
1
Attaching the light kit fitter assembly
□
Connect the wires from the light kit fitter assembly (O), not
included, to the wires from the bottom of motor assembly (E) by
connecting the molded adaptor plugs together. Carefully tuck
all wires and splices into the switch cup.
□
Place the light kit fitter assembly (O) into the motor assembly
(E), aligning the raised dimples on the top flange of the light kit
fitter assembly (O) with the flat areas on the switch box on the
bottom of motor assembly (E).
□
Turn the light kit fiiter assembly (O) clockwise until it stops.
E
F
E
O
11
Please contact 1-855-HD-HAMPTONBAY for further assistance.
HAMPTONBAY.COM