controller and follow the prompts to activate.
6. Flight
Manual Takeoff/Landing
Start/stop motors:
perform Combination
Stick Command and hold
for two seconds.
Control Stick Mode
The default control stick mode is mode 2. The left control stick controls the altitude and heading of
the aircraft while the right control stick controls the forward, backward, and sideward movements.
Always set an appropriate RTH mode and altitude when remote controller signal is
lost before takeoff.
Press the Flight Pause button for emergency braking during flight.
Takeoff: slowly push the left control stick (mode 2) up to take
off.
Landing: slowly push the left control stick (mode 2) down
until the aircraft lands. Hold for three seconds to stop the
motors.
Or