Use and handling
Never disassemble or modify the console or accessories
Use the console and accessories according to the instructions in the product
documentation� No authorisation for the analysis or modification of the console
or accessories, or the analysis and use of its circuit configurations, is provided�
Unauthorised modification of the console or accessories will void your warranty�
There are no user serviceable components inside the console�
Additionally, there is a risk of exposure to laser radiation as well as to electrical shock�
Network
• An internet connection is required to connect to a network�
• You are responsible for internet service fees� For details, refer to the information
provided in your service contract or contact your internet service provider�
• Use only an Ethernet cable compatible with 10BASE-T, 100BASE-TX or 1000BASE-T
networks� Do not use a cord for a standard residential telephone line or cables of types
other than those mentioned here� Using the wrong type of cord or cable can cause
more electrical current than necessary to flow through the LAN port, which may lead
to heat build-up, fire or malfunction�
Wireless networking feature
• The frequencies used by the wireless networking feature of the product are the
2�4 GHz (WLAN, Bluetooth®)/5 GHz (WLAN) ranges� The 2�4 GHz range of radio waves
is shared by various devices� The product has been designed to minimise the effect
of other devices using the same range� However, in some cases, interference from
other devices may reduce the connection speed, shorten the signal range,
or cause the connection to be terminated unexpectedly�
• When using the console scan function to select a wireless LAN access point,
access points that are not intended for public use may be displayed� Only connect
to an access point that you are authorised to use, or one that is available through
a public wireless LAN or hotspot service�
Handling the controller
• Charge in an environment where the temperature range is between 10 °C and 30 °C�
Charging may not be as effective when performed in other environments�
• The battery has a limited lifespan� Battery duration will gradually decrease with
repeated usage and age� Battery life also varies depending on the storage method,
usage state, environment and other factors�
• When the controller is not used for an extended period of time, it is recommended
that you fully charge it at least once a year in order to maintain battery functionality�
12
Care instructions
For safety reasons, before cleaning the console or connected accessories,
disconnect the AC power cord from the electricity supply�
Exterior surfaces (plastic cover of console and controller)
• Wipe down with a soft, dry cloth�
• To prevent the surface of your console or peripherals from changing colour
and quality, follow the guidelines below�
– Do not spray with or apply insecticides or volatile substances, including paint
thinner, benzene, or alcohol� Do not wipe with chemically treated cloths�
– Do not rest or store your controller or headset on top of your console�
Vents
Do not block any vents� To maintain good ventilation, follow the guidelines below:
• Place the console at least 10 cm away from a wall surface�
• Do not place on a carpet or rug with long fibres�
• Do not place in a narrow or cramped space�
• Do not cover with cloth�
• Do not allow dust to build up on the vents� Use a cleaning tool such
as a handheld vacuum cleaner to remove dust buildup�
It is also recommended to remove the covers, and then use a handheld
vacuum cleaner to remove the dust trapped underneath� For details
on covers, see "Remove and attach covers" (page 7)�
Ports/connectors
Do not use ports/connectors on the console if they are dirty� They may not
conduct electricity properly� When they are dirty, wipe them with a dry cloth�
Disc handling (Only for consoles with a disc drive installed)
Note on compatibility
Some media may have region or territorial restrictions and may not work
with your console� See media packaging for details�
Handling
Fingerprints, dust, dirt or scratches on the disc can distort the picture
or reduce sound quality� Please note the following�
• Do not touch the disc surface when handling a disc�
• Do not stick paper or tape onto discs and do not write on discs�
Storage
• Do not expose discs to high temperatures, high humidity or direct sunlight�
• When discs will not be used for an extended period of time, store them in their
cases� Stacking uncased discs or storing them at an angle can cause them to warp�