Cleaning And Care - WMF Lono Instrucciones De Uso

Vacuum packing using fi lm rolls in the detachable fi lm box
1. Push back the cover on the detachable fi lm box (2).
2. Place the fi lm roll in the fi lm box. Ensure that the fi lm roll is positioned in the fi lm box as shown in
the image.
Then close the cover on the fi lm box again.
3. Pull the fi lm roll out of the fi lm box. The fi lm should come out at least 10 cm over the front edge
of the fi lm box.
4. Carefully lower the vacuum packer onto the hooks on the sides of the fi lm box. Make sure that the
guides on both sides of the vacuum packer click into place. You will hear the click.
5. Now insert the mains plug into the socket.
6. Open the lid on the vacuum packer.
7. Remove the detachable cutting unit (6). You can remove this easily using the snap-on hooks on
each side of the cutting unit.
8. Fold the excess fi lm into the vacuum packer and reinsert the cutting unit. Make sure that the
cutting unit is level and clicks into place on both sides.
9. Place the fi lm sleeve with the open end on the welding bar (5). The fi lm may enter the vacuum
chamber (4) slightly at this point.
10. Hold the fi lm sleeve in position and close the lid.
11. Then press the SEAL button to seal the fi lm sleeve. The ring of light will turn white for the duration
of the sealing process.
12. After sealing, pull the fi lm upwards to the desired length.
13. Fold the fi lm forwards and cut it by pushing the knife that is integrated into the cutting unit from
left to right.
14. The resulting fi lm pouch can now be fi lled with food and vacuumed and sealed as described under
"Vacuum packing using sachets".
16
Using the vacuum tube
You can use the vacuum tube to vacuum suitable sachets and containers. Before you use it, check
whether your sachet or container is suitable for vacuum packing using a vacuum tube (9).
1. Remove the vacuum tube from the storage box (9) and connect it to the designated opening on
the right-hand side of the vacuum packer.
2. Now insert the mains plug into the socket.
3. Press and hold down the appliance's lid and turn the lock-release lever (8) towards the
until it is almost vertical.
4. Now attach the tube to the sachet/container.
5. Then press the VACUUM TUBE button to extract the air from the sachet/container. Note: The
volume of air to be extracted may vary depending on the sachet/container used.
6. The appliance will turn off automatically once the process is complete.
7. Now close the valve or the seal on the sachet/container to prevent air from entering.
8. Remove the vacuum tube and store it in the storage box (9) provided.
9. Turn the lock-release lever (8) towards the

Cleaning and care

Cleaning
Pull out the mains plug and allow the appliance to cool down.
Do not immerse the appliance in water. Instead, wipe it clean using a damp cloth and a little
washing-up liquid.
dishwasher-safe
Vacuum packer (1)
Detachable fi lm box (2)
Detachable vacuum chamber (4)
Detachable cutting unit (6)
Vacuum tube
lock icon
lock icon, then open the lid on the vacuum packer.
can be rinsed wipe clean with a
under running damp cloth
water
17