Bixpy PP-768 Manual Del Usuario página 11

FEATURES OF YOUR PP-768
Your PP-768 has been designed with some really cool features that make it a unique Outboard battery best
suited for small watercraft.
YOUR KILL SWITCH
The kill switch is there to protect you in case of an accident where you and your vessel are separated.
Always ensure that the kill switch is attached to you in some way. That way if you and your vessel part
ways the motor stops immediately. Not wearing your Kill Switch can lead to serious injury or death to you
and those around you.
START WITHOUT YOUR REMOTE
If you lose, misplace or have a dead battery in your remote control, your PP-768 is still able to turn on and
run your motor using the Kill Switch. Tapping your kill switch on the "On Switch" area of your battery four
times in a timed sequence will activate your PP-768 at about 50% power. Watch this video to learn how to
do this: www.bixpy.com/4taps. This features starts and runs your Thruster at 50% power only. Stop by
removing the Kill Switch.
WARP SPEED FEATURE
You can get your PP-768 to run at full speed by double clicking your forward button on your Bixpy Remote.
At any speed on your battery, click your forward button once, and once again and hold. You will hear a
double beep and your battery will go immediately to speed 12. Click one more time to Turbo Speed (13).
SPEED 13 - TURBO SPEED
Because your PP-768 is a large battery with clever heat dissipation features, we have included a 13th
speed on the battery controller. Although this speed gives you an extra boost of power, it does tend to drain
the battery more quickly. A nice feature for getting out of tight spots quickly or when you're fighting current
and wind.
Page 10