Bixpy PP-768 Manual Del Usuario página 14

BATTERY ERROR INDICATIONS
Your Bixpy PP-768 offers an incredibly simple user interface and the product is made to run your motors with
as little effort as possible.
In most cases if your battery is not running your motor, it has to do with the connection point. Always check
your connectors for a good secure mating and always check your connectors prior to mating to ensure the
pins are not damaged.
Aside from that, in most other cases, if you are having trouble with your product, the easiest thing is to
contact our support line for assistance.
Below are the most common events you may encounter with your device and some simple troubleshooting
suggestions.
EVENT
Motor Jam or high
current draw
Motor or motor
cable damaged
Disconnected motor
or communication
error
Other events
LED LIGHTS BEEPER
6 LEDs flashing 4 beeps
Continuous
6 LEDs flashing 4 beeps
Continuous
5th LEDs 4 beeps
flashing Continuous
Various LED Various beeps
TROUBLESHOOT/RESOLUTION
Reset the battery with kill switch. Unjam the
motor, try running motor again.
Reset the battery with kill switch. Check cable
and connectors on motor and battery side for
damage. Reconnect the motor and try again. If
not resolved, contact Bixpy.
Ensure a good connection. Check cable and
connectors on motor and battery side for
damage. Reconnect the motor and try again. If
not resolved, contact Bixpy.
Any other
Page 13