Troubleshooting - TFA ICON Instrucciones De Uso

TFA_No. 60.2543_Anleit_11/19 09.11.2019
ICON – Design Radio-controlled alarm clock
• The alarm will be interrupted for the set time (5 minutes default).
• To deactivate the alarm function slide the ALARM ON/OFF switch to OFF. The alarm symbol disappears.
8. Display light
• Press the SNOOZE/LIGHT sensor button to adjust the brightness in 2 levels or to switch it off (LOW –
HIGH – OFF). The default setting is LOW.
9. Care and maintenance
• Clean the device with a soft dry cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Store the device in a dry place.

10. Troubleshooting

Problem Solution
➜ Connect the device to the power adapter
No display
➜ Check the power adapter
➜ Set the brightness with the SNOOZE/LIGHT sensor button
28
14:35 Uhr Seite 15
ICON – Design Radio-controlled alarm clock
➜ Wait for the DCF signal reception
Weak display
➜ Set the brightness with the SNOOZE/LIGHT sensor button
➜ Press and hold the UP button for 2 seconds to activate the reception.
No DCF reception
➜ Wait for an attempt reception during the night
➜ Restart the instrument according to the manual
➜ Choose another place for your product
➜ Check if there is any source of interference.
➜ Set the clock manually
➜ Restart the instrument according to the manual
Incorrect indication
If your device fails to work despite these measures, contact the retailer where you purchased the product.
11. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
29