Troubleshooting - TFA 60.2513.01 Manual De Instrucciones


Press the ▲ or ▼ button to set the time you want.

To activate the alarm function, move the switch to ON/OFF. The alarm symbol appears on
the display.

When the alarm is reached, it will be activated at this time.

The alarm symbol will be flashing.

Press any button and the alarm function will stop working.

If it is not stopped deliberately, the alarm will automatically turn off after certain minutes
and will be reactivated for the same time.

During the alarm, press the SNOOZE/LIGHT button and the snooze function is activated.

Once the snooze function is activated, Zz flashs on the display.

The alarm will be interrupted for 5 minutes.

The snooze function can be activated up to seven times.

Move the ON/OFF switch downwards, the alarm function is deactivated.

The alarm symbol disappears on the display.
Backlight

Press SNOOZE/LIGHT button. The backlight will come on for 5 seconds.
Battery replacement

Change the batteries when the display becomes weak.

Open the battery compartment and insert two new batteries 1,5 V AAA, polarity as
illustrated.

Close the battery compartment again.
Care and maintenance

Clean the device with a soft damp cloth. Do not use solvents or scouring agents.

Remove the batteries if you do not use the device for a long period of time.

Keep the device in a dry place.

Troubleshooting

Problems
No display on the
device
Solutions
Ensure batteries polarity are correct
Change the batteries