Using Bluetooth ® Devices; Available Only When A Usb Bluetooth Adapter; Connecting A Bluetooth Device - JVC KD-A725 Manual De Instrucciones

Using Bluetooth ® devices
Available only when a USB Bluetooth Adapter (separately purchased) is connected.
By connecting a USB Bluetooth Adapter and a microphone unit (with an separately purchased
accessory kit, KS-BTA50) to this unit, you can use a Bluetooth device with this unit.
Once the USB Bluetooth Adapter is attached, this unit is always available for pairing.
• Only one USB Bluetooth Adapter can be detected at a time.
This unit supports the following Bluetooth profiles
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• PBAP (Phonebook Access Profile) 1.0
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.3

Connecting a Bluetooth device

When you connect a Bluetooth device to the unit for the first time, make pairing between the unit
and the device.
• Once the connection is established, it is registered in the unit even if you reset the unit. Up to five
devices can be registered in total. "PAIRING FULL" scrolls on the display if you tried to pair the 6th
device.
• This unit supports Secure Simple Pairing (SSP).
• Pairing sequence may be different from what is described below.
• A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected
at a time.
1
] Turns on the power.
2
USB input terminal
USB cable from the
rear of the unit
] Make sure USB Bluetooth Adapter
is connected to one of the USB input
terminals.
or
USB Bluetooth Adapter
(separately purchased)
3 Use the Bluetooth device to search and
select "JVC Unit."
• For some Bluetooth devices, you may
need to enter the PIN code first after
search.
4
Perform one of the following pairing
operations (what appear depends on the
Bluetooth device pairing process).
(A) If "BT PAIRING" flashes, then
"[Device name]" = "VOL – YES" =
"BACK – NO" scrolls on the display.
] Select "YES" to start the pairing
process.
If "PAIRING" appears...
] Operate the Bluetooth device to
accept.
Continued...
ENGLISH 11