Storing Channels In Memory - JVC KD-A725 Manual De Instrucciones

Activate your SIRIUS subscription after
connection
1
] "SIRIUS"
SIRIUS Satellite radio starts updating all
the SIRIUS channels. Once completed,
SIRIUS Satellite radio tunes in to the
Preview Channel.
2
Check your SIRIUS ID. (page 27)
3
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
• "SUB UPDT PRESS ANY KEY" scrolls on
the display once subscription has been
completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
] "XM"
XMDirect ™ Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. "Channel 1" is tuned in
automatically.
2
Check your XM Satellite Radio ID labelled
on the casing of the XMDirect™ Tuner
Box or XMDirect2 Tuner System, or tune
in to "Channel 0". (See right column.)
3
Contact XM Satellite Radio on the
internet at <www.xmradio.com> and
click on "Activate Radio", or you can call
1-800-XM-RADIO (1-800-967-2346).
• Once activated, the unit can then be
tuned to one of the available channels.
22 ENGLISH

Storing channels in memory

You can preset up to 18 channels for both
SIRIUS and XM.
1
Tune in to a channel you want to store.
(Steps ~ – !, see page 21.)
2
[Hold]
"PRESET MODE" flashes.
3
] Selects a preset number.
Preset number flashes and "MEMORY"
appears.
Selecting SIRIUS/XM preset
station
Checking the satellite radio ID
While selecting "SIRIUS" or "XM"...
] Select "Channel 0."
SIRIUS: The 12-digit SIRIUS ID will be displayed
after "Channel 0" is selected.
XM: The display alternately shows "RADIO ID"
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."