Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The appliance stops
suddenly
The appliance hardly
picks up any dust and/or
the suction power drops
Odours spread or even
dust escapes from the
appliance
∙ If this does not help, please contact our customer service.
1 dust container set
(1 motor pre-filter + 1 EPA filter)
TB7216:
1 Jet Drive turbo brush
PB7210:
1 XXL Upholstery Nozzle
Disposal
Devices marked with this symbol must be disposed of separately from your household waste, as they contain
valuable materials which can be recycled. Proper disposal protects the environment and human health. Your local
authority or retailer can provide information on the matter.
The integrated overheating protection has responded (possibly due to an overfilled dust
container or similar) In this case, proceed as follows:
1.
Switch off the appliance.
2.
Pull plug from main socket.
3.
Eliminate the cause of overheating (either the dust container needs emptying - see the
section on "Emptying the dust container", or the filters need cleaning - see the section
on "Cleaning or replacing the motor pre-filter" or there is a blockage somewhere, which
needs to be removed).
4.
Include the suction hose, nozzle, and tube and search for the cause of the overheating.
5.
Close the cover and re-fit all accessory.
6.
Wait another 45 minutes.
After the appliance has cooled off, you may switch it on again.
The dust container needs to be emptied (see the section on "Emptying/cleaning the dust
container").
It is advisable to take this opportunity to clean the filters at the same time (see "Cleaning or
replacing the motor pre-filter").
With the switchable floor nozzle attached, the switch is not in a position appropriate to the
type of floor.
Select the correct position for the switch.
It is likely that parts of the dust container or vacuum cleaner accessories that were
dismantled to clean the filter or change accessories were not properly reinstalled or closed.
Check that all parts are correctly and firmly in place.
Spare parts and disposal
0157-048:
Solution
PB7217:
1 parquet brush
ZB7214:
1 long, flexible crevice nozzle
TB7215:
1 Mini Turbo Nozzle
17
Publicidad
