Declaración Ce De Conformidad - metso ND7000H Instrucciones De Instalacion, Mantenimiento Y Funcionamiento

62
14 DECLARACIÓN CE DE CONFORMIDAD
EC DECLARATION OF CONFORMITY
Manufacturer:
Metso Automation Oy
01301 Vantaa
Finland
Product:
Intelligent Valve Controller Neles ND 9000- and ND 7000-series
Approvals:
Type
ND9...PA(Profibus PA)
ND9...F (Foundation Fieldbus)
ND9... HNT (Hart)
ND7...HNT (Hart)
ND910.HX
ND910.FX
ND910.PX
ND920.HX
ND920.FX
ND920.PX
ND930.HX
ND930.FX
ND930.PX
ND710.HX
ND920...E1, ND930...E1
ND720...E1
As the products within our sole responsibility of design and manufacture may be used as parts or components in machinery and are not alone
performing functions as described in Article 6(2) in the Machinery Directive (2006/42/EC), we declare that our product(s) to which this Declaration of
Conformity relates must NOT be put into service until the relevant machinery into which it is to be incorporated has been declared in conformity with
the provisions of the Machinery Directive.
The product above is manufactured in compliance with the applicable European directives and technical specifications/standards.
Protection from e.g. static electricity caused by the process or connected equipment must be considered by the user (EN 60079-14§6).
The product do not possess any residual risk according to hazard analyses made under the applicable directives providing that the procedures
stated by the Installation, Operation and Maintenance manual are followed and the product is used under conditions mentioned in the technical
specifications.
Applicable directives:
EMC 2014/30/EU
ATEX 94/9/EC (until 19 April 2016)
ATEX 2014/34/EU (from 20 April 2016)
ATEX Notified Bodies for EC Type Examination Certificate:
SIRA (Notified body number 0518)
Sira Certification Service
Rake Lane, Eccleston, Chester, CH4 9JN
England
VTT (Notified body number 0537)
VTT, Expert Services
Otakaari 7B, Espoo
P.O.Box 1000, FI-02044 VTT
Finland
Vantaa 7th January 2016
Ralf Liljestrand, Quality Manager
Authorized person of the manufacturer within the European Community
Approval
EMC 2014/30/EU
EN 61000-6-4 (2007) + A1(2011)
EN 61000-6-2 (2005)
EMC 2014/30/EU
EN 61000-6-4 (2007) + A1(2011)
EN 61000-6-2 (2005)
ATEX II 1 G Ex ia IIC T6...T4 Ga
ATEX II 1 D Ex ta IIIC T90 °C Da
ATEX II 1 D Ex ia IIIC T90...T120 °C Da
ATEX II 2 G Ex ib IIC T6...T4 Gb
ATEX II 2 D Ex tb IIIC T90 °C Db
ATEX II 2 D Ex ib IIIC T90...T120 °C Db
ATEX II 3 G Ex nA IIC T6...T4 Gc
ATEX II 3 D Ex tc IIIC T90 °C Dc
ATEX II 3 D Ex ic IIIC T90 °C...T120 °C Dc
ATEX II 3 G Ex ic IIC T6...T4 Gb
ATEX II 3 D Ex tc IIIC T90 °C Dc
ATEX II 3 D Ex ic IIIC T90 °C...T120 °C Dc
ATEX II 2 G Ex d IIC T6...T4 Gb
ATEX II 2 D Ex tb IIIC T80 °C...T105 °C Db IP66
Electrical
Approved and Ex marked types
EC Type examination Certificate
SGS Fimko 278969-1
SGS Fimko 276525-2
VTT 09ATEX 033X
EN 60079-0: 2012,
EN 60079-11: 2012,
EN 60079-26: 2007,
EN 60079-31:2009
VTT 09ATEX 034X
EN 60079-0: 2012,
EN 60079-11: 2012,
EN 60079-15: 2010,
EN 60079-31:2009
SIRA 11 ATEX 1006X
EN 60079-0:2012, EN 60079-1:2007
EN 60079-31:2009
ATEX Notified Body for Quality Assurance:
ISO 9001:2008 Certificate No: 73538-2010-AQ-FIN-FINAS
ATEX 94/9/EC Annex IV Certificate No: DNV-2006-OSL-ATEX-0260Q
Det Norske Veritas AS (Notified body number 0575)
Veritasveien 1
1322 Høvik, Oslo
Norway
7 ND90 71 es