Hayward RC34 Serie Manual Del Usuario página 28

Take a moment to get familiar with the cleaner.
Remove the cleaner by placing the carton down and removing it from the box
as shown. Models with a caddy cart the cleaner and the Power Supply Control
should be mounted on the cart.
Caddy Cart Assembly
1.
3.
Insert Upper Hook using 2 self-tapping screws
HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.
Page 7 of 20
GENERAL OPERATING INSTRUCTION
5.
Mount cleaner & power supply
2.
Insert Lower Hook using 2 self-tapping screws
4.
Remove plastic caps from axel. Lay cart on side, slide
one wheel onto axel.
Using a small hammer, gently tap axel cap onto axel.
Turn cart over and install remaining wheel and cap.
Rev. C