PROBLEM
The turntable will
not turn.
CAUSE
_ You have turned off the turntable. (See "Heating more than one plate of
food", Page 14.)
_ The turntable is not correctly in place. It should be correct-side
up and
sitting firmly on the center shaft.
_ The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service technician
for repair. Cooking without the turntable can give you poor results.
PROBLEM
You do not hear the
programming or
end-of-cycle
tone.
CAUSE
You have not entered the correct command.
You have turned off the tone. See the "Audible signals" section on Page 14.
PROBLEM
CAUSE
The display is flashing ":".
_ There has been a power interruption.
Reset the clock. (See the "Setting the
clock" section on Page 16.)
If none of these items are causing your problem, see the "Sears Toll-Free Numbers" section on Back Cover.
89