Eaton TRIPP LITE Serie Manual Del Propietário página 6

Installation
Note:
• When the USB-C port is connected to a power source, 15W
of power is dedicated to the docking station and other
devices. The remainder is used to charge the connected
device.
• See Optional Accessories section for suggested cables.
• In the event the detachable USB cable is lost or misplaced,
a USB-C to USB-C 5A 3-foot cable (such as U420-003-5A,
U420-003-G2-5A or U420-C03-G2-5A cables) can be found
at Tripplite.Eaton.com.
• When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no
connection is made, you can manually establish one by
going to your computer's network settings. For example,
when using a Mac, you would navigate to the "Network" icon
found in System Preferences, click the "Assist Me" button to
access the Network Setup Assistant, then follow the prompts
to establish a connection.
1. Using the included USB 3.2 Gen 1 USB-C 5A
cable, connect the docking station's USB-C host
port to the USB-C or Thunderbolt 3 port on your
laptop, tablet or other device.
2. Using an HDMI cable (such as P568-Series High-
Speed HDMI cables), connect the dock's HDMI
port to the HDMI port on a monitor.
3. Connect up to three USB devices to the dock's
USB-A hub ports for data or charging.
6