Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Open the packing box, take out the power cable and instruction booklet, and then
take out the cotton filter elements. Finally, take out the fan unit.
•
Position the main fan as required.
•
Connect the flexi tube(s) to the top of the fan ensuring they are locked into
place.
•
Fit the collector hood(s) onto the top of the flexi tube(s).
•
Adjust the collector hood so it is approximately 20cm from the source of the
fume or smoke keeping the flexi tubes smoothly curved and straight without
any sharp bends or kinks.
•
Connect the mains cable to the socket on the fan and plug into a mains power
outlet and turn on the power.
•
Activate the on/off switch. The switch will illuminate when the power is on.
•
To switch the fan on and change the fan speed adjust the speed control on the
front of the fan from low to high as required.
•
When the fan is operating the indicator LED will illuminate.
12
WFE-260
MAX-VAC.COM
Publicidad
