Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER REPLACEMENT
Replacement of primary filter element
•
Remove the old cotton filter and replace with a
new cotton element laid flat onto the medium
filter element.
Replacement of secondary filter element
•
Remove the cotton filter element.
•
Hold the tab on one end of the medium-
effect filter element and gently pull it out of
the recess in the high-efficiency filter without
disturbing the high efficiency filter element.
•
Replace the new element with the tabs
uppermost and press into the recess in the
high efficiency filter
•
Replace the cotton filter on top.
Replacement of HEPA H10 Filter Element
•
After removing the primary cotton filter and the
medium effect filter element, extract the high
efficiency element by holding it at both ends
and gently pulling upwards.
•
Replace with a new high efficiency element
inserted into the fan unit, then insert the
medium effect and the cotton filter in turn.
•
Replacement of primary filter element
•
Replacement of secondary filter element
•
When all filter elements are in position replace the fan top cover and ensure the
retaining clips are engaged.
•
Re-attach the flexi tubes and adjust as required.
•
Reconnect to the mains supply and power on the fan and adjust the air flow.
WFE-260
MAX-VAC.COM
15
Publicidad
