Descargar Imprimir esta página

Beurer EC 70 SafePlus Instrucciones De Uso página 43

Pulsera de emergencia

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
essary. Once an update has been successfully installed on the emergency wristband,
the LEDs
light up blue.
2
Make sure to update the "caera" app as soon as a new version is available in the Apple
App Store (iOS) or Google Play (Android
The volume of the emergency wristband can be adjusted in the "caera" app under the
device settings. You can find more information on this in the "caera" app.
7.12 Restarting the emergency wristband/troubleshooting
You can reset and restart the emergency wristband if you unexpectedly experience prob-
lems with the device and can no longer use it.
• To do this, connect the emergency wristband to the charger whilst holding down
the ON/OFF/emergency button
white. Once you remove the emergency wristband from the charger, it should work
normally again. If the problems persist, please contact Customer Services.
8. CLEANING AND MAINTENANCE
To ensure full functionality, clean the emergency wristband, charger and other accesso-
ries at regular intervals.
Cleaning the emergency wristband
1. Remove the wristband from the charger
2. Clean the wristband with a soft, dry or slightly damp cloth. Do not use chemical
cleaning products.
3. Allow the wristband to dry completely.
4. Check that there are no more liquids or dirt on the microphone
Cleaning the charger
1. Remove the mains plug
2. Clean the charger
cleaning products. When cleaning, ensure that the charging contacts
USB-C socket do not get wet.
3. Then allow the charger
Technical maintenance
• Make sure that you replace the emergency wristband in the case of a defect or a
severe reduction in battery life. Please contact our Customer Services.
• Clean the emergency wristband, the charger and all accessories at regular intervals.
• Check the emergency wristband, the charger and all accessories regularly for dam-
age (e.g. to the housing or charging contacts) and replace damaged or defective
accessories if necessary. Please contact our Customer Services.
TM
. Hold down the button until all 4 LEDs light up
3
14
and the charging cable
10
with a soft, dry or slightly damp cloth. Do not use chemical
to dry completely.
10
).
.
10
13
from the charger
43
4
and loudspeaker
10
.
and the
11
1
.

Publicidad

loading