INSTRUCCIONES DEL PANEL DE CONTROL
MODO Y SIGNIFICADO DE LA LUZ INDICADORA
Power
1
Short press the power button to open or close the machine
Mode/Delay button
2
• Initial state of startup, mode is "Normal", press mode button to select different modes and
select 8 modes: Normal, Quick, Deep Wash, Delicate, Blanket, Spin, Rinse+Spin, Tub Clean.
• In opening status, before press Start/Pause button,press Mode button for 3 seconds to enter
the Delay set, press Mode to set 2-24h delay wash. Long press Mode button to exit delay
setting. There is no delay wash in Tub Clean.
• After Delay wash setted, press Start/Pause, Mode light off, delay time and digital light
twinkle. Press Mode to check the setted mode. If need to cancel, press Power to back to
stand-by status.
Child Lock
3
Notice:
1. When the program is running, press the Water level and Rinse buttons at the same time to
enter the child lock, digital light show left time and CL alternantly.
2. When it alarm because of top lid opening (child lock function) and it starts draining, the
draining can not be stopped even if the top lid is closed. Only by releasing the child lock
function can it stop the draining.
3. Entering stand-by status, the machine will warning in each 10 minutes until Child Lock
cancelled.
• After child lock function cancelled, the machine will contiune working, if in washing process,
the machine will automaticlly supply water to setted level. If there is other error warning, solve
them according to other error solution.