Bojungle B725000 Instrucciones De Uso página 26

29-30: Assemble the upper detachable tubular structure. Press the secondary lock button then fit onto the connecting tube and
the connecting tube, pushing down until you hear a click.
Warning: When using the shaker function, it must be assembled in place. Check to ensure that the product is assembled
correctly before using this product, otherwise there will be safety risks!
31-32: Pull up the bed head opening and closing zipper and pull it all the and then pull up the bed head opening and closing
zipper.
33-34: Fasten the central fixing tube of the belt fixing buckle with the four hook and loop fasteners on the inner backing.
Warning: The 4 hook-and-loop fasteners on the inner substrate must fasten the central fixing tube of the fixing buckle of
the column belt, otherwise the bed will become loose!
35: Install the parts on the image into the inner lining according to the steps in the right order.
Warning: The mattress cover cannot be removed when using the shaker, it must be wrapped and used as it is! Do not use
this product when the mattress cover is removed for cleaning! Otherwise there will be safety risks!
Assembling electric toys (image 36-39):
36-37: Install the toy stand on the electric toy. Clear the toy rack clip and slot, and then push the toy rack clip into the slot until
you hear a click.
Warning: Before assembling, be sure to recognize the toy frame clip and the slot! Align the toy rack buckle with the slot
before pushing it in! If it is not aligned and assembled, the buckle will be damaged and cannot be clamped, which will
affect normal use!
38-39: Insert the assembled electric toy into the toy seat until you hear a click.
Warning: Electric toys are not handles and cannot be used as handles! The toys shown in the picture are for reference only
and are not consistent with the actual objects.
FUNCTION INTRODUCTION (image 40-74)
Brake function (image 40-41)
40: Caster brake function: The four wheels of the shaker are equipped with brake function. Use your toes to move the wheel
brake lever to control the brake.
41: Move the wheel brake lever. The state shown in A is the braking state, and the shaker cannot be pushed; move the brake
lever of the wheel to position B and the brake is in release state, and the shaker can be pushed.
Warning: When using the shaker, you must ensure that the wheel is in the braking state to use this product, otherwise the
normal use of the swing function will be affected! Do not touch the brake lever with bare feet!
Bed lift adjustment function (image 43-50)
43-44: There are 8 high and low gear adjustments, which can be adjusted. When adjusting the bed body up and down, it should
be operated in the direction facing the host panel, put both hands on the two ends of the shaker, press the two lock buttons
with the index fingers of both hands at the same time, and pull up a lock handle with the middle, at this time, the locking device
is opened, and the double-handed broaching bed body is adjusted up and down. During the process of up and down adjustment,
it is necessary to keep the locking device in the open state and adjust to the appropriate gear. Then let go the gear adjustment.
The 4th gear height is the highest gear adjustement, when using the shaker function, users can adjust other gears according to
their preferences.
45-47: The inclination of the bottom of the shaker can be adjusted. Use the same steps and methods above to adjust the
inclination of the bed at one end of the baby's head, and adjust the inclination height. Adjust 3 gears, and then let go after
adjusting to the appropriate height. (Fig. 46) and (Fig. 47) are 2 different tilt height gears after adjustment. (Fig. 47) shows the
highest adjustable tilting gear.
Warning: When adjusting the up-down gear and the inclined gear, make sure that the second lock and the first lock are
fully opened before the adjustment can be carried out normally! Otherwise, the up-down gear adjustment and the inclined
gear adjustment cannot be performed normally. Children cannot adjust the high and low gears in the bed! When the tilt
gear is adjusted, the highest adjustable gear is 3 gears than the other end which is the highest adjustable gear. If it is
adjusted to a higher tilt gear, it will affect the life of the shaker! Do not place the baby's head on the sloping low end!