Publicidad
Idiomas disponibles
Idiomas disponibles
6
Set
7
+/-
8
Start/Stop
Temperature
9
display
10
Time display
11
° C/° F
12
Wi-Fi indicator
13
Heating indicator
Vacuum pump
14
indicator
15
Lock/Unlock
16
Lid button
Restore factory
17
settings
Settings: After selecting the target mode, you can set the temperature
or time by pressing the "Set" button. When the number on the display
flashes, tap or long press the "+" or "-" to adjust temperature and time.
View settings: During operation, press and hold the "Set" button for
about 3 seconds, and you can check the time and temperature
settings.
If there is no operation in the setting mode, the number on the display
will flash 10 times before the device automatically exits the settings.
When the number on the display flashes, tap or long press "+" or "-" to
adjust temperature and time.
Press the button to start the machine in the selected mode.
Displays the current temperature or the set temperature.
Displays the operating time or the set time.
In standby status, press the "° C/° F" button to switch temperature units.
The Wi-Fi indicator lights up when the device is connected to the
mobile app.
When this indicator is on, it means the device is heating up.
When this indicator is on, it means the device is vacuuming.
When the "unlock" indicator lights up, the lid can be opened.
When the "lock" indicator lights up, it means that the machine is
working, and the lid is not allowed to open. If you want to open the lid,
you need to stop the machine, and open it when the "unlock" icon lights
up.
Press the lid button to open the lid.
Under the standby status, long press the "Mild Sear" button and
"Manual" button simultaneously for 3 seconds. When you hear a
"beep" sound, the machine switches to NeoVide mode (the displayed
temperature is 60° C and the timer is 24:00), then you can release the
buttons. The machine is then under factory settings.
9
Publicidad
