Mitsubishi Electric TRANE TPEFYP008MA144A Manual De Instrucciones página 3

Display
The main display can be displayed in two different modes: "Full" and "Basic." The factory setting is "Full." To switch to the "Basic" mode, change the
setting on the Main display setting.
▌ Full mode
* All icons are displayed for explanation.
㉓
⑫ ⑬⑭ ⑮ ⑯
㉒
⑥
⑦
⑧
⑨
⑩
①
⑪
㉑
① Operation mode
Indoor unit operation mode appears here.
② Set temperature
Set temperature appears here.
③ Clock
Current time appears here.
④ Fan speed
Fan speed setting appears here.
⑤ Button function guide
Functions of the corresponding buttons appear here.
⑥
Appears when the ON/OFF operation is centrally controlled.
⑦
Appears when the operation mode is centrally controlled.
⑧
Appears when the set temperature is centrally controlled.
⑨
Appears when the filter reset function is centrally controlled.
⑩
Indicates when filter needs maintenance.
⑪ Room temperature
Current room temperature appears here.
⑫
Appears when the buttons are locked.
⑬
Appears when the On/Off timer or Auto-off timer function is enabled.
appears when the timer is disabled by the centralized control system.
appears when the HOLD function is enabled.
⑭
Appears when the Weekly timer is enabled.
⑰ ⑱
③
⑲
⑳
④
②
⑤
▌ Basic mode
①
⑮
Appears while the units are operated in the energy-save mode. (Will not appear on
some models of indoor units)
⑯
Appears while the outdoor units are operated in the silent mode.
⑰
Appears when the built-in thermistor on the remote controller is activated to monitor
the room temperature ( ⑪ ).
appears when the thermistor on the indoor unit is activated to monitor the room
temperature.
⑱
Indicates the vane setting.
⑲
Indicates the louver setting.
⑳
Indicates the ventilation setting.
㉑
Appears when the set temperature range is restricted.
㉒ Centrally controlled
Appears for a certain period of time when a centrally-controlled item is operated.
㉓ Error display
An error code appears during the error.
* When an error code is displayed on the main display, an error is occurring but the
indoor unit can keep its operation. If an error occurs, note the error code and consult
your dealer.
Most settings (except ON/OFF, mode, fan speed, temperature) can be
made from the Main menu.
②
⑤
③
④
3