Settings 1; Analog Output Setting; Digital Output Setting; Automatic Display Darkening Setting - Esoteric Grandiosa K1X Manual Del Usuario

Settings 1 (continued)

Analog output setting

AOUT>***
Use this to select the analog output connector to be used.
o By default, the setting is XLR2.
XLR2
Analog audio signals are output through the XLR connectors with
pin 2 HOT.
XLR3
Analog audio signals are output through the XLR connectors with
pin 3 HOT.
RCA
Analog audio signals are output through the RCA connectors.
ESLA
Analog audio signals are output as ES-LINK Analog (ESL-A) through
the XLR connectors.
o These connections use ordinary XLR cables, but the signals are
transmitted in a unique format, so this setting should only be
used with compatible devices.
o See page 12 for more about ES-LINK Analog (ESL-A).
OFF
Analog outputs are disabled and the D/A converter is turned off.

Digital output setting

DOUT>***
Use this to select the digital output connector to be used.
o By default, the setting is OFF.
o The signal is output without upconversion.
o During Super Audio CD playback, this is automatically set to off.
OFF
Digital audio is not output.
XLR
The CD digital audio signal is output from the XLR DIGITAL OUT
connector.
RCA
The CD digital audio signal is output from the RCA DIGITAL OUT
connector.
26

Automatic display darkening setting

DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is ON.
o If the OEL display is left on with the same indication for a long time,
brightness irregularities can occur. For this reason, we recommend
that you set the automatic display darkening function to ON.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
OFF
The display will not turn off automatically.
o If no operation is conducted for ten minutes, the display will
dim to DIMMER 1 brightness to protect it from excessive wear.

Automatic power saving setting

APS>***
If there is no input from the selected input source for the set time, the
power will turn off automatically.
o By default, the setting is 30m.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.