Lyambda LLT156P01 Manual De Usuario página 22

LED Keyboard
Your system supports 2 types of keyboards:
• Multi-Color LED Keyboard - You can change the color
for the multi-color LED keyboard.
• Full Color "Per Key" LED Keyboard (Factory Option) -
You can change the colors for individual keys on the full
color "Per Key" LED Keyboard.
The LED Keyboard application can be accessed by clicking
LED Keyboard in the Control Center (or by pressing the Fn
plus key) or from the Start menu in
Windows .
The keyboard LED may be configured using the Fn + key
combination outlined in the table below.
Keyboard LED Function key Combinations
Launch the LED Keyboard
Fn +
Application
Toggle the Keyboard LED
Fn +
On/Off
Keyboard LED Illumination
Fn +
Decrease
Keyboard LED Illumination
Fn +
Increase
Table 4 - Keyboard LEDs
Multi-Color LED Keyboard
Click LED Keyboard in the Control Center
to access the LED Keyboard application.
Color Swatch
The color swatch in the middle of the screen allows
you to select a range of colors for your keyboard
backlight by clicking on the color required. Click to
select any color from the swatch to apply to the keyboard.
KB Sleep Timer
Enable and then select the amount of time for which
the system is idle before the keyboard LED enters
sleep mode (i.e. the LED keyboard illumination will
turn off to save power).
KB Brightness
You can adjust the keyboard brightness
using the Brightness slider.
On boot the
keyboard will
momentarily flash.
You can click in
the Override Boot
Effect check box to
disable the keyboard
flashing effect as
the system boots.
18