Driver Installation
The Device Drivers & Utilities + User's Manual disc contains
the drivers and utilities necessary for the proper operation
of the computer. This setup will probably have already been
done for you. If this is not the case, insert the disc and click
Install Drivers (button), or Option Drivers (button) to access
the Optional driver menu. Install the drivers in the or der
indicated in
Figure
20. Click to select the drivers you wish
to install (you should note down the drivers as you
install them). Note: If you need to reinstall any driver, you
should uninstall the driver first.
Latest Updates
After installing all the drivers make sure you enable Check
for updates (Settings > Windows Update) and go to the
Microsoft Store and click Downloads and updates > Get
updates to update all Apps etc.
Figure 20 - Install Drivers
Driver Installation & Power
When installing drivers make sure your computer is powered
by the AC/DC adapter connected to a working power source.
Some drivers draw a significant amount of power during the
installation procedure, and if the remaining battery capacity
is not adequate this may cause the system to shut down
and cause system problems (note that there is no safety issue
involved here, and the battery will be rechargeable within
1 minute).
Driver Installation
General Guidelines As a general guide follow
the default on-screen instructions for each driver
(e.g. Next > Next > Finish) unless you are an
advanced user. In many cases a restart is required
to install the driver.
Make sure any modules(e.g. WLAN or Bluetooth)
are ON before installing the appropriate driver.
25