Lyambda LLT156P01 Manual De Usuario página 33

TPM (Option)
Before setting up the TPM (Trusted Platform Module)
functions you must initialize the security platform.
Activating TPM
1. Restart the computer.
2. Enter the BIOS pressing F2 during the POST/startup.
3. Click Setup Utility and select the Security menu.
4. Click TPM Configuration and select Enable for Security
Device Support.
5. You will then need to press/click F10 to save the changes
and restart the computer.
TPM Management in Windows
You can manage your TPM settings from within Windows:
1. Go to the Control Panel.
2. Click BitLocker Drive Encryption (System and Security).
3. Click TPM Administration.
Figure 26 BitLocker
Drive Encryption
(TPM Administration)
4. The TPM Management window allows you to configure
the TPM within Windows. As TPM is usually administered
within large enterprises and organizations, your system
administrator will need to assist you in managing the
information here.
Figure 25 Security -
Trusted Computing
TPM Actions
1. Click Prepare the TPM and follow the instructions in
the Wizard to prepare the TPM (this will probably require
a restart of the computer and confirmation of the setting
changes after restart by pressing the appropriate F key).
2. After the restart the TPM will be prepared and you can
then use the Actions menu to Turn TPM off, Change
Owner Password, Clear TPM or Reset TPM Lockout.
3. A wizard will help take you through any setup steps.
Figure 27
Trusted Platform Module
(TPM) Management on Local
Computer Administration
29