Lyambda LLT156P01 Manual De Usuario página 26

To access the Display control panel in Windows:
1. Right-click the desktop and select Display settings from
the menu.
2. Choose the required display settings from the menus.
To access the Intel® Graphics Command Center:
1. Access the Intel® Graphics Command Center from the
Start menu in Windows
To access the NVIDIA Control Panel:
1. Access the NVIDIA Control Panel from the Start menu in
Windows .
Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or Mini DisplayPort and/or DisplayPort
over USB 3.2 Gen 2 Type-C port and/or Thunderbolt
4 port. See your display device manual to see which formats
are supported.
Configuring the Displays in Windows
All external and internal displays (up to 5 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
5 Connected Displays
Note that when 5 displays are connected, only 2 displays
may be configured in Duplicate mode.
To configure the displays using the Display
control panel:
1. Attach your external display(s) to the appropriate port, and
turn it(them) on.
2. Right-click the desktop and select Display settings from
the menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
.
5. You can configure up to 5 displays from the Multiple
displays menu.
To configure the displays
using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them) on.
2. Press the
combination.
3. Click on any one of the options from
the menu to select PC screen only,
Duplicate, Extend or Second screen
only.
4. You can also click Connect to a
wireless display at the bottom of the
Project screen and follow the steps to
connect to any wireless enabled
display.
Figure 15
Display (Multiple
displays)
+ P (or Fn + F7) key
Figure 16 - Project
22