MECH MIND NANO Manual De Usuario página 6

DIN Rail Power Supply
Output connector
Input connector
AC power cable
The AC power cable has three wires: L, N, and PE (
The DC power cable has three wires: +V, -V and PE (
When wiring the DIN rail power supply, wires of the power cable must be inserted
to the corresponding input/output connectors.
The PE wires must be properly grounded! Please install the DIN rail power
supply inside a control cabinet.
8. Use the Camera
The camera is controlled by the Mech-Eye SDK software. In Mech-Eye SDK, based
on the characteristics of the target objects, you can adjust the parameters of
Mech-Eye Industrial 3D Camera to conveniently obtain high-quality 2D images,
depth maps, and point clouds.
Download Mech-Eye SDK
http://www.mech-mind.com/download/camera-sdk.html
Online User Manual
Visit our online user manual for information on installing and using Mech-Eye
Viewer and Mech-Eye API, and learn about data acquisition and parameter
adjustment.
http://docs.mech-mind.net/latest/en-GB/MechEye/MechEye.html
09
-V -V +V +V
N L
DC power cable
).
).
9. Maintenance
Cleaning the Camera
When cleaning the surface of the camera, please blow off the dust gently, and
then use a clean soft cloth to gently wipe the surface. When cleaning the camera
lens, a liquid lens cleaner and clean lint-free cloth can be used to carefully wipe
the lens to avoid scratching.
WARNING
Do not clean the camera with corrosive or volatile solvents such as alcohol,
●
gasoline and kerosene. These substances may damage the exterior and internal
structure of the camera.
Do not use a pressure washer gun or hose to spray and wash the camera. Water
●
entering the camera may lead to malfunction, fire, or even explosion. Water or
other liquid damage to the camera is not covered by the warranty.
Storing the Camera
This product is rated as IP65. The enclosure of the camera can prevent dust from
entering and affecting the functions of the camera. Soaking the camera in water
or placing it in a highly humid environment may lead to malfunction. Rusting of
the internal unit will lead to irreversible damage. When not used, please store the
camera in an indoor, dry, cool and well ventilated place. To avoid damage caused
by rain, snow, and other undesirable conditions, please do not place the camera
outdoors for an extended period of time. Storage tempurature is -20–60°C.
WARNING
Disconnect the camera from the power supply when storing to avoid fire.
●
Do not leave the lens pointed at the sun or other intense light source for an
●
extended period of time. Intense light may cause the image sensor to deteriorate
and produce a white blur effect in images.
10. Trademark and Legal Statement
Mech-Mind and Mech-Mind series logos including
of Mech-Mind Robotics Technologies Ltd. ("Mech-Mind") and other related entities.
© Copyright 2022, Mech-Mind Robotics Technologies Ltd.
Unless authorized in writing in advance by Mech-Mind, no part of the trademarks shall
be used, reproduced, modified, transmitted, transcribed, or used or sold with other
products as a bundle by any entity or individual in any form for any reason.
Any infringement of Mech-Mind's trademark rights will be punished in accordance
with the law.
Mech-Mind reserves all rights regarding this user manual. According to copyright laws,
unless authorized in writing by Mech-Mind, this user manual shall not be reproduced,
modified, reprinted or issued in part or in its entirety by any entity or individual. Users
who purchased and use the product may download, print or copy the user manual for
personal use or use inside the belonging organization. Unless authorized in writing by
Mech-Mind, the contents of the user manual may not be used for any other purposes.
EN EN
are registered trademarks
10