IKEA VALLHORN Manual Del Usuario página 5

Factory reset
To reset and remove all connected products, quick-press the
Pairing button 4 times (within 5 seconds). Follow steps 1-3 to
reconnect your smart products.
Care instructions
To clean the product, wipe it with a soft dry cloth. Do not use
abrasive cleaning agents, chemical solvents or other equipment
that may damage the products.
IMPORTANT!
• Operating temperature: -5ºC to 40 ºC.
• Do not leave the sensor in direct sunlight or close to any heat
source to prevent overheating.
• Different building materials and placement of the units can
affect the wireless connectivity range.
WARNING!
Risk of explosion if either battery is replaced by an incorrect
type. Do not mix batteries of different capacities, types or date
stamps. Dispose of used batteries according to instructions.
Technical data
Model: VALLHORN motion sensor
Type: E2134
Input: 2.4V, 2 x LADDA batteries HR03/AAA 1.2V
Range: 10 m in open air.
Sensor view angle: 60º - 120º
Sensor range: About 10 m
Operating frequency: 2405-2480 MHz
Output power: 3 dBm
IP-class: IP44
5