cecotec PROCLEAN 2110 Manual De Instrucciones página 24

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Door lock system
2. Display window
3. Shaft
4. Turntable ring assembly
5. Control panel
6. Mica plate
7. Glass turntable
8. Grill
9. Metal grille
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Use a damp cloth to clean the inside of the appliance and the removable parts. Make sure
that all parts are dry before using the appliance.
- Make sure the appliance is switched off before connecting it to a wall outlet.
- The microwave door must be closed in order to operate.
- The appliance must be placed in such way that the plug is accessible and the socket must
be properly earthed to avoid electric shocks.
- In case there is any manufacturing remains in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
- Check that the appliance is not damaged, that the door is not misaligned or bent, that the
door seals are in good condition, that the hinges are not broken or loose, and that there are
46
PROCLEAN 2110
no dents on the inside or on the door. If any damage is observed, stop using the appliance
and contact the official Cecotec Technical Support Service immediately.
3. OPERATION
Fig. 2
Control panel
The microwave panel has 2 selector knobs:
Power knob
Select from 9 settings: 5 microwave power levels, 1 grill function setting, and 3 combinations.
The different microwave power levels are as follows:
Low: 18% power
Defrost: 36% power
Medium: 58% power
Medium-high: 81% power
High: 100% power
Timer knob
The cooking or heating time can be programmed from 1 to 30 minutes. Turn the knob clockwise
to increase the cooking time. You can turn the knob at any time to increase or decrease the
operating time or to stop the microwave.
Using the microwave
- Plug the appliance to a power supply (before switch-on, make sure the timer knob is in the
Off position).
- Place the food to be cooked or heated inside the microwave and close the door.
- Turn the Power knob to select the desired heating power:
- Turn the Timer knob clockwise to select the desired operating time. The microwave will
start working when the timer is set.
- To stop the microwave during the heating or cooking process before the set time, turn the
timer knob to the Off position and open the door.
- When you have finished using the microwave, make sure that Timer knob is in the off
position.
Note:
When selecting less than 2 minutes of operation, turn the timer knob past 2 minutes and then
back to select the desired time.
ENGLISH
47
PROCLEAN 2110