Descargar Imprimir esta página

cecotec Cumbia POWER ESPRESSO 20 MATIC Manual De Instrucciones página 19

Cafetera espresso
Ocultar thumbs Ver también para Cumbia POWER ESPRESSO 20 MATIC:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Espresso button
2.
Double espresso button
3.
Manual control
Power button
4.
5.
Steam button
6.
Removable grille
7.
Drip tray
Water tank cover
8.
9.
Water tank
10. Steam knob
11. Coffee machine's main body
12. Milk frother tab
13. Milk frother
14. Measuring spoon with tamper
15. Portafilter
16. Filter fixing tab
17. Filter holder
18. Double-coffee filter
19. Single-coffee filter
20. Cup-warming tray
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
36
POWER ESPRESSO 20 MATIC
Box content
-
PowerEspresso 20 Matic coffee machine
-
Single-coffee filter
Double-coffee filter
-
-
Measuring spoon with tamper
-
Portafilter
-
Instruction manual
First use
-
Pour water into the water tank, the water level should not exceed the "MAX" mark in the
tank. Close the water-tank cover.
Connect the power cord of the coffee machine to the power supply and press the power
-
button. The indicator light will turn on.
-
Press the manual control button to activate the water pump. The water pump will
automatically start pumping water to the coffee machine to heat it up.
The machine will start heating up and the indicator light will start flashing until the
-
preheating process is over. Once the appliance has reached its optimal temperature, the
light will stop flashing.
-
Press the button to prepare a single coffee. Hot water will come out from the machine, use
the water to clean filters or cups.
3. OPERATION
Making coffee
Place the filter in the portafilter.
-
-
While the appliance is preheating, fill the filter with coffee and use the tamper end of the
measuring spoon to press it down.
-
Hold the portafilter, insert the filter holder into the machine and place an empty cup on the
removable grille.
-
Press the espresso button to brew 1 single espresso.
-
Press the double espresso button to brew 1 double espresso.
These 2 previous functions can be customised. If you want to change the default coffee
amount, do the following:
1.
Press the single or double espresso button. Once you have obtained the desired amount
of drink, press the previous button again to stop the brewing process. Next time the
button is pressed, the machine will dispense the new saved amount.
2.
Press the manual control button once to brew the desired amount of coffee and press the
same button again to stop it.
ENGLISH
POWER ESPRESSO 20 MATIC
37

Publicidad

loading

Este manual también es adecuado para:

01509