Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate
to contact us: help@lionelo.com
Producer:
BrandLine Group Sp. z o. o.
A. Kręglewskiego 1, 61-248 Poznań, Poland
The product meets the requirements of the standard: R129/03.
NOTICE. This is a Universal Belted Enhanced Child Restraint System. It is approved according
to UN Regulation No. 129, for use primarily in "Universal seating positions" as indicated by
vehicle manufacturers in the vehicle user's manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
The product is only suitable for installation on the locations marked with symbols 2 to 7 in
fig. B, and marked i-Size.
The seat is designed for rear-facing installation with three-point seat belts only (fig. B). Do
not install the seat in a location with the front airbag activated. It is recommended that the
seat should only be installed in the rear seats of the car.
WARNINGS:
1.
The product is designed for children from birth to 13 kg and with a height between
40 and 87 cm.
2.
Hard parts and plastic parts of the child restraint system should be placed and installed
in such a way that they cannot be trapped by a sliding seat or vehicle door under normal
vehicle operating conditions.
3.
Any seat belts that restrain a child must be well-fitted to the child's body structure. The
belts must not be twisted.
4.
The straps securing the restraint to the vehicle must be tight.
5.
Make sure the lap belts run low to adequately secure the pelvis.
6.
If the product has been exposed to strong elements (such as impact), it should be replaced.
7.
Do not make any changes to the seat or add new components without approval from
the approval authority. To ensure maximum safety for your child, the equipment should
be attached and used as recommended in the instructions.
‑ 13 ‑
EN
EN