Bosch 1364 Instrucciones De Funcionamiento Y Seguridad página 10

BM 1609929C59 12/02 12/10/02
REVERSING FIRE DIRECTION
However we strongly recommend having
this task performed by an authorized Bosch
Service center.
1. Disconnect the plug from the power source.
2. Remove abrasive wheel.
3. Loosen wing nuts enough to allow screw
heads to slide out of foot plate mounting
holes provided in guard, and remove foot
plate.
4. Remove the four gear housing screws and
rotate gear housing 180˚. Replace housing
screws and securely tighten screws.
9:44 AM Page 10
5. Loosen guard securing cap screw and
rotate guard for maximum wheel coverage
and securely tighten guard securing cap
screw with the wrench provided.
6. Remove the auxiliary handle mounting
bolts, reposition handle using auxiliary hole
in handle, replace mounting bolts and
securely tighten handle.
7. Re-assemble foot plate and abrasive
wheel.
-10-