Publicidad
Idiomas disponibles
Idiomas disponibles
TIME AND STATUS DISPLAY
The Time and Status Display shows the estimated time
remaining, cycle progress, lint screen status, and vent
status. When the dryer is turned on, the display will
illuminate.
CheckVent
@
Check Lint
Screen
O
ESTIMATED
TIME REMAINING
When the START/PAUSE button is pressed, the
display will indicate the estimated time remaining for
the selected drying cycle.
O
CHECK VENT
(Duct Blockage Sensing System)
The Check Vent (Duct blockage sensing system)
detects and alerts you to blockages in the ductwork
that reduce airflow from the dryer. This improves
operating efficiency and help minimize service calls,
saving you money.
If the Check Vent LED is blinking, the dryer ductwork
has a blockage that needs to be removed
immediately.
If the Check Vent LED is not blinking, the ductwork is
free from blockages.
CYCLE STATUS INDICATOR
This portion of the display shows which stage
of the drying cycle is currently underway
(DRYING, COOLING, or WRINKLE GUARD).
LINT SCREEN
INDICATOR
The dryer automatically detects reduced airflow
caused by a full lint screen. The Check Lint Screen
indicator will light before each load as a reminder
to check the lint screen before starting each load.
If the lint screen becomes clogged during a load,
the indicator will come on to let you know that
the screen should be cleaned immediately for
maximum efficiency. Always clean the lint screen
before every cycle.
21
Publicidad
