Descargar Imprimir esta página

Kenmore 796.8885 Guia De Uso Y Cuidado E Instrucciones De Instalacion página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

KEY PARTS AND COMPONENTS
There are several important components that are
referenced in this manual.
Q
O EASY-TO-USE CONTROL PANEL
Rotate the Cycle Selector Knob to select the
desired dry cycle. Add cycle options or adjust
settings with the touch of a button. Press the Cycle
Selector Knob to start the selected dry cycle.
_) TIME AND STATUS DISPLAY
The easy-to-read LED display shows cycle options
and information and provides cycle status during
operation.
(_ CHECK VENT
(Duct Blockage Sensing System)
The Check Vent (Duct blockage sensing system)
detects and alerts you to blockages in the exhaust
system that reduce airflow from the dryer.
Maintaining clean exhaust system ducts
improves operating efficiency and helps
minimize service calls, saving you money.
(_) ULTRA-CAPACITY
STAINLESS
STEEL DRUM WITH DRUM LIGHT
The ultra-large stainless steel drum offers superior
durability. The drum is equipped with a light that
illuminates when the dryer door is open and turns
off when the door is closed.
(_ EASY-ACCESS REVERSIBLE DOOR
Wide-opening,
see-through glass door provides
easy access for loading and unloading. Door swing
can be reversed to adjust for installation location.
O FRONT-MOUNT LINT SCREEN
Front-mounted lint screen allows for easy access
and cleaning between loads.
(_ LEVELING
FEET
Four leveling feet (two in front, and two in back)
adjust to improve dryer stability on uneven floors.
_) DRYING
RACK (Included
Accessory)
Use the drying rack with the RACK DRY cycle option.
The drying rack allows items such as sweaters,
delicates, and gym shoes to be placed
in a flat position for drying.
For special installation applications, the following
kits are available. Go to www.searspartsdirect.com,
or call 1-800-4-MY-HOME ® for ordering information.
O LP CONVERSION KIT (P/N 383EEL3002A)
This LP conversion kit contains all required parts
to change the dryer gas connections from Natural
Gas (NG) to Liquefied Propane Gas (LP).
_) SIDE VENT KIT (P/N 383EEL9001B)
The side vent kit contains the necessary parts
to change the dryer from a rear vent to a side
vent location.
O
O
O
[Q]o
Terminal Block
Access Panel
(Electric Models)
Power Cord
Location
(Gas Models)
Gas Connection
Location
(Gas Models)
Exhaust Duct
Outlet
Rear of Dryer

Publicidad

loading

Este manual también es adecuado para:

796.9885