Descargar Imprimir esta página

cecotec CONGA 7490 IMMORTAL HOME Manual De Instrucciones página 53

Ocultar thumbs Ver también para CONGA 7490 IMMORTAL HOME:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
7. Bracket anchor button
8. Mop bracket
9. Mop
Please note
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
This robot vacuum cleaner includes a package designed to protect it during transport. Take
-
the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe
place, as this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Warnings
Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
-
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 4
-
If the room to be cleaned is near a balcony or stairs, a physical barrier should be placed to
prevent the robot vacuum cleaner from falling and getting damaged, thus ensuring safe
operation. Fig. 5
-
Do not use the robot vacuum cleaner for liquids. Fig. 6
-
Direct exposure to sunlight or heavy light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
location for it to start running again. 
-
Please note that the total height of the robot vacuum cleaner is 9.3 cm and the sensors
are at the bottom, so it is advisable to prevent access to all areas below 9.3 cm to avoid
damaging the laser.
Installing the robot vacuum cleaner and the self-emptying base
1. Place the self-emptying base against a wall and leave a minimum free space of 1.5 metres
to the front and 0.5 metre to each side. Fig. 7
2. Plug the self-emptying base to a power socket. Wind and store the remaining cable to
prevent accidents.
3. Install the side brush. Fig. 8
CONGA 7490 IMMORTAL HOME X-TREME
ENGLISH
53

Publicidad

loading