Publicidad
Idiomas disponibles
Idiomas disponibles
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance
and cleaning, always make sure the system
has been switched off, using the remote
control, and the power supply plug has
been disconnected from the system socket
(or the upstream master isolating switch
is positioned at "0" OFF).
Do not touch the metal parts of the unit when removing the air
filters. They are very sharp. Cuts or injury risk.
4.1 - CLEANING
4.1.1 - Appliance and remote control cleaning
Use a dry cloth to clean the appliance and the remote control (fig. 33).
It is possible to use a cloth moistened with cold water to clean the appliance if it is
very dirty.
Suck between the air inlet and outlet grilles (fig. 33).
Do not use a chemically treated or antistatic cloth to clean the
appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the
plastic surface.
EN - 40
33
Publicidad
