Attention: Before restarting the heater, it must be unplugged for at
least 10 minutes.
Note: This appliance is equipped with an open-window detection
function; when the product detects that the room temperature has
decreased by more than 3 degrees over the last half an hour, the
appliance will stop providing heat and the display screen will show
"00".
USING THE MANUAL AND REMOTE CONTROLS
Note: This control panel contains the buttons for operation of the
electric heater. The buttons behind the door and those on the remote
control function in the same way. The remote control has an effective
range of up to 13 feet.
1. Ventilation slots
2. Safety bracket
3. Glass panel
4. Power cable and plug
5. ON/OFF switch
6. Control panel
7. Remote control
8. Digital display unit
9. Function indicator
10. Power ON/OFF button
11. Flame control button
12. Thermostat button
13. Timer button
14. Blue-flame button
15. Flame speed button