Publicidad
Idiomas disponibles
Idiomas disponibles
[] PC Settings
Thisfunctionletsyouadjustthe PC screen position, c lock and phaseduring
PC input,
1
Press [SETUP] to display the main menu.
2
Use [Cursor • /V]
to select"PC
SETTING",
then press [ENTER].
e.g.) PC mode
or
- WSETUP
-
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
BACK LIGHT
[BRIGH_
COLOR TEMR
[NORMAL]
_"PC SETTING
CLOCK, PHASE
Use [Cursor
•Iv]
to select an item,
then use [Cursor _II_]
to adjust the "CLOCK" setting
to stabilize the PC screen and the "Phase" setting to
improve
the clarity of the PC screen.
Cursor _1
Cursor I1_
CLOCK
to decrease setting value
to increase setting value
PHASE
Press [SETUP] to exit.
3
Adjust the setting.
AUTO ADJUSTMENT
Use [Cursor •Iv]
to select "AUTO ADJUSTMENT",
then press [ENTER].
or
- PC SETTING -
AUTOADJUSTMENT
HORIZONTALPOSmON
[ 15]
VERTICAL POSITION
[ -15]
CLOCK
[ -_]
PHASE
[
0]
Note:
• Adjust the "PHASE" setting after the "CLOCK"setting has
been properly adjusted.
• Youmay not obtain on appropriate screen with auto
adjustment for some signals. In this case,adjust the settings
manually.
• The setting range oftbe horizontot/vertiealposition
is +-30,
but the limit value differs depending on PCinput signal.
• The horizontal/vertical
position,
clock and phase of
the PC screen are automatically
adjusted
in a few
seconds,
HORIZONTAL
POSITION,
VERTICAL
POSITION
Use [Cursor •Iv]
to select an item,
then use [Cursor _II_]
to adjust the PC screen position.
Cursor _1
Cursor I_
HORIZONTAL
to move PC screen left
to move PCscreen right
POSITION
VERTICAL
to move PC screen down
to move PC screen up
POSITION
EN
Publicidad
